3 Layers: Twaron, Strong Like Steel
High heat resistance, cut-resistant, no melting point, low flammability, make TWARON the best high protection innovative synthetic fiber.
PMJ produce its products with ballistic TWARON, the same used in the production of bulletproof vests, which is difference from all other aramidic knitted, thanks to the shuttle construction with weft/warp woven. The material obtained from these innovative yarns is much more harder than many other, but of course also much more resistant. The resistance is much higher than, cotton fabrics, knitted fabrics, linings and felt.
PMJ makes abrasion resistance and cut tests on aramid fiber. The test is the same used to test clothing for motorcyclists and provides values known throughout the world (EN13595).
ABRASION, CUTTING AND BURST
CE EN 13595-1:2002 TEST APPROVED
There’s no other type of fabric that combine strength, practicality and comfort as used by PMJ.
RESISTANCE
All our products are internally reinforced with aramid fabric, better known as Twaron. Twaron is a synthetic polymer fiber with an incredible strength, so that equal weight is 5 times stronger than steel
THERMAL RESISTANCE
The aramid fiber also has a high resistance to heat, decomposes at about 500°C without melting and has an exceptional resistance to abrasion.
BALLISTIC TECHNOLOGY
In our products we only use ballistic Twaron, the same used for production of bulletproof vests, which is difference from all other aramid fabrics knitted, thanks to the woven construction weaving weft and warp. The TWARON® yarn used by PMJ is converted into roll from an Italian company, using the best fibers in the world, produced by Teijin Aramid in Japan.
BALLISTIC TECHNOLOGY
Once completed the fabric, this is worked of our purpose and then subjected to various controls and laboratory tests to check its potential for abrasion resistance. The fabric obtained from these innovative yarns is much thicker and denser than most, nut of course also much stronger. The resistance is much higher than standard aramid fabrics, woven knitted fabrics, linings and felt.
SELECTED REINFORCEMENT
We chosen to reinforce only the greatest risk impact areas, so to maintain a comfortable and breathable product as possible. All reinforced areas are lined too and the Twaron is completely invisible and is not in direct contact with body parts.
SAFETY FOR BIKERS
Only 25% of motorcyclists wearing protective trousers that will help to save the legs during a fall. The majority of injuries affecting the lower limbs during a fall, are abrasions and lacerations.
Models we carry with Twaron 260gr. full protection, certified EN:13595-1 Level 2 (8 sec.), certified EN17092-2 AAA (4 sec.):
- Titanium
Models we carry with Twaron 260gr. hips, knees, back protection, tested EN13595-1 Level 2 (8 sec.), certified EN17092-2 AAA (4 sec.):
- Vegas
- Jefferson
- Florida
Models we carry with Twaron 200gr. hips, knees, back protection, tested EN13595-1 Level 1 (4.4 sec.), certified EN17092-2 AAA (4 sec.):
- Cafe Racer
Models we carry with Twaron 200gr. hips, knees, back protection, tested EN13595-1 Level 1 (4.4 sec.), certified EN17092-2 A (2 sec.):
- Santiago
Models we carry with Twaron 200gr. hips & back protection, tested EN13595-1 Level 1 (4.4 sec.), certified EN17092-2 A (2 sec.):
- Skinny
1 Layer: T-Tex Pro, T-Tex & T-Stretch
PMJ has developed a new technology that allows the production of fabric with Twaron fibers woven with Denim. The result is a single layer fabric, developed in two different versions, which does not need to be matched with the Twaron fabric and lining, allowing unprecedented wearability and lightness.
Models we carry with T-Tex Pro full protection, tested EN13595-1 Level 1 (4.4 sec.), certified EN17092-2 AAA (4 sec.):
- Deux
Models we carry with T-Stretch full protection, certified EN17092-2 AA (2 sec.):
- Russel
- Russel Tarmac
Models we carry with T-Tex full protection, certified EN17092-2 A (2 sec.):
- New Rider
- Street
- Sara