25mm Lowering Shock Absorber DDA / Plug & Travel - BMW F850GSA 2018 and up
**** The conversion of the replacement springs should be made by a specialist workshop.
**** When lowering -25mm, the rear and front area must be revised together.
**** To ensure the parked stability of your BMW F850GS after it has been lowered, we recommend using shorter kick stand and/or the center stand.
Touratech Suspension lowering -25mm shock absorber is an absolutely top class suspension component for your BMW F850GS Adventure equipped with the BMW DDC system. This premium shock absorber is systematically designed for long-distance touring with lots of luggage, on any type of road surface and even off-road. This Touratech Suspension DDA / Plug & Travel shock absorber simply replaces the BMW DDC shock. The existing plug connectors and switches on the handlebar are retained and used as usual. This Touratech Suspension lowering system is completely integrated into the motorcycle via the original BMW control unit. You can continue to use the various riding mode and load setting configurations on the BMW display. The Touratech suspension system that adapts itself to the adventurer inside you - so all you have to do is ride! Absolute top-class suspension components.
This Touratech Suspension DDA / Plug & Travel shock absorber is manufactured using the same precision components and parts that have been tried-and-tested in our shock absorbers over thousands of miles of touring, under the most intense conditions. At the heart of this shock absorber is the high-performance DDA valve, developed and patented by Tractive. It allows the damping to adjust in fractions of a second to any riding situation. To withstand the rigors of long-distance touring, our shock absorbers have a larger piston diameter, which means a larger oil capacity. This enables better cooling with a high damping frequency. As a result, the shock absorber and damping are more stable and there is less stress on the seals.
- Touratech Suspension DDA Plug & Travel "rear" shock absorber -25mm
- Ready to fit with plug connector and wiring
The basic setup fitted here is designed for riders up to 100 kg including luggage. Modifications are possible for a heavier rider (more than 100 kg) and/or if the bike is usually ridden with a passenger / with luggage. In this case, we individually modify the shock absorber to meet your needs by fitting a spring with a higher spring rate.